ZyXEL Communications G-3000H Manuel D’Utilisation
G-3000H User’s Guide
150
Chapter 12 Remote Management Screens
12.3 Configuring Telnet
You can configure your ZyAIR for remote Telnet access as shown next. The administrator
uses Telnet from a computer on a remote network to access the ZyAIR.
uses Telnet from a computer on a remote network to access the ZyAIR.
Figure 83 Telnet Configuration on a TCP/IP Network
12.4 Configuring TELNET
Click REMOTE MGNT and the TELNET tab to display the screen as shown.
Server Access
Select the interface(s) through which a computer may access the ZyAIR using this
service.
Secured Client IP
Address
A secured client is a “trusted” computer that is allowed to communicate with the
ZyAIR using this service.
Select All to allow any computer to access the ZyAIR using this service.
Choose Selected to just allow the computer with the IP address that you specify to
Select All to allow any computer to access the ZyAIR using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyAIR using this service.
Apply
Click Apply to save your customized settings and exit this screen.
Reset
Click Reset to begin configuring this screen afresh.
Table 45 Remote Management: WWW
LABEL
DESCRIPTION