ZyXEL Communications G-3000H Manuel D’Utilisation

G-3000H User’s Guide

152

Chapter 12 Remote Management Screens

Figure 85   Remote Management: FTP

The following table describes the labels in this screen.

Simple Network Management Protocol (SNMP) is a protocol used for exchanging 
management information between network devices. SNMP is a member of the TCP/IP 
protocol suite. Your ZyAIR supports SNMP agent functionality, which allows a manager 
station to manage and monitor the ZyAIR through the network. The ZyAIR supports SNMP 
version one (SNMPv1) and version two (SNMPv2c). The next figure illustrates an SNMP 
management operation. SNMP is only available if TCP/IP is configured.

Note: SNMP is only available if TCP/IP is configured.

Table 47   Remote Management: FTP

Server Port

You may change the server port number for a service if needed, however you must 

use the same port number in order to use that service for remote management.

Server Access

Select the interface(s) through which a computer may access the ZyAIR using this 

service.

Secured Client IP 

Address

A secured client is a “trusted” computer that is allowed to communicate with the 

ZyAIR using this service. 
Select All to allow any computer to access the ZyAIR using this service.
Choose Selected to just allow the computer with the IP address that you specify to 

access the ZyAIR using this service.

Apply

Click Apply to save your customized settings and exit this screen. 

Reset

Click Reset to begin configuring this screen afresh.