Carrier Access Access Navigator Manuel D’Utilisation

In the above message, the channel type can be GR303 (voice or ISDN BRI), or 

private crossconnects using VOICE or DATA. P-Phone settings only appear in the Access 
Navigator / GR-303 Host with P-Phone. This procedure only provides steps for 
provisioning GR-303 service. See also Provision DCS Service on 

2. If drop DS0 settings are correct, skip remaining steps.

3. Set DS0 type. (ISDN BRI and P-Phone use gr303.)

set ds0 <n:ch> type <voice|data|gr303>

Example:

set ds0 10:1-18 type gr303

Example:

set ds0 10:19-24 type data

4. Set DS0 signaling (for voice only) to Loop Start (ls), Ground Start (gs), or E&M (em) signaling with 

the following command:

set ds0 <n:ch> signal <ls|gs|em> 

Example:

set ds0 10:1-18 signal ls

5. Set DS0 call reference value (needed for GR-303 ISDN BRI and P-Phone)

set ds0 <n:ch> crv <setting>

Example:

set ds0 10:1 crv 120

6. Set DS0 in service

set ds0 <n:ch> up

Example:

set ds0 10:1-24 up