Canon WUX400ST Manuel D’Utilisation
108
Customizing System Operation (System Settings)
Registering User Logos
> [System settings] > [User screen
settings] >
[Logo capture]
Registers the current image as a
user logo. Registered user logos can
be shown when no signal is
received, when the BLANK button is
pressed, or as the startup image.
user logo. Registered user logos can
be shown when no signal is
received, when the BLANK button is
pressed, or as the startup image.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
setting and then press the MENU
button or EXIT button.
Positioning User
Logos
> [System settings] > [User screen
settings] >
[Logo position]
Specify the position of registered
user logos as follows.
user logos as follows.
• The factory default is [Center].
• You can specify the position after a logo has
• You can specify the position after a logo has
been registered.
HDMI
Component
LAN
Digital PC
Analog PC
USB
OK
Display the image for logo
registration. Align the image with
the red boundary lines indicating
the portion that will be stored, and
then press the OK button. The
portion of the image within the
boundary lines is now registered.
registration. Align the image with
the red boundary lines indicating
the portion that will be stored, and
then press the OK button. The
portion of the image within the
boundary lines is now registered.
Cancel Cancels logo registration.
HDMI
Component
LAN
Digital PC
Analog PC
USB
Upper L
Indicates the display position
for user logos.
for user logos.
Upper R
Center
Lower L
Lower R