Canon WUX400ST Manuel D’Utilisation
113
Customizing System Operation (System Settings)
Oper
ation
Setti
ng Fu
nctio
n
s fr
om Me
om Me
nus
Assigning a Channel
for Remote Control
> [System settings] >
[Remote
control channel]
When using multiple projectors at
the same time (maximum 4), you can
assign a different channel to each
remote control so that each operates
independently.
the same time (maximum 4), you can
assign a different channel to each
remote control so that each operates
independently.
Selecting the Projector Channel
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
setting and then press the MENU
button or EXIT button.
• The factory default is [Independent] for both
projector and remote control.
• After changing the channel on the menu, be
sure to change the channel of the remote
control too.
control too.
• If a cable is connected, it is not necessary
to perform remote control channel setting.
To Unlock Key Lock Function
Turn off the projector and unplug the
power plug. Hold down the OK button on
the main unit and plug in the power cord,
as you continue to hold down the OK
button. In a moment, a beep will sound,
and the controls will be unlocked.
power plug. Hold down the OK button on
the main unit and plug in the power cord,
as you continue to hold down the OK
button. In a moment, a beep will sound,
and the controls will be unlocked.
HDMI
Component
LAN
Digital PC
Analog PC
USB
Ch1
Ch2
Ch3
Ch4
Ch2
Ch3
Ch4
Select the remote control
channel to use with this
projector.
channel to use with this
projector.
Independent Remote controls set to any
channel can be used.