Canon WUX400ST Manuel D’Utilisation
116
Customizing System Operation (System Settings)
When the setting is completed, press
the OK button to accept your setting
and then press the MENU button or
EXIT button.
the OK button to accept your setting
and then press the MENU button or
EXIT button.
Requiring a Password
for Operation
> [System settings] > [Other settings] >
[Password settings]
Disables the projector unless the
correct password is entered.
correct password is entered.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
setting and then press the MENU
button or EXIT button.
• [Off] is the factory default.
• You cannot set [On] unless you have
• You cannot set [On] unless you have
completed [Register password].
Once you set a password, the
password entry screen appears at
power-on.
Enter a 4 digit password.
Enter the password using the [ ] / [ ] /
[ ] / [ ] buttons.
If the password is valid, the projection
starts. If you enter a wrong password
three times, the power will be turned off.
password entry screen appears at
power-on.
Enter a 4 digit password.
Enter the password using the [ ] / [ ] /
[ ] / [ ] buttons.
If the password is valid, the projection
starts. If you enter a wrong password
three times, the power will be turned off.
• The power is also turned off if no password
is input for 3 minutes.
HDMI
Component
LAN
Digital PC
Analog PC
USB
Off
The projector can be used even if no
password is entered.
password is entered.
On
The projector cannot be used unless
you enter your password.
you enter your password.