Manualsbrain.com
  1. Manuels
  2. Marques
  3. Canon
  4. WUX400ST
  5. Manuel D’Utilisation

Canon WUX400ST Manuel D’Utilisation

Télécharger
Page de 314
Installation-Related Menu Settings
156
Specifying the Menu 
Display Time
> [Install settings] > [On screen] >
 
[Menu display time]
The setting for the menu display 
time can be extended from the 
normal 10 or 30 seconds to 3 
minutes.
Press the OK button to accept your 
setting and then press the MENU 
button or EXIT button.
• [Normal] is the factory default.
• The following display and operation are also 
changed.
Showing/Hiding Lamp 
Replacement 
Warnings
> [Install settings] > [On screen] >
[Lamp warning display]
A message that advises you to 
change the lamp can be set to 
display when the lamp has been 
used for the specified period of time.
Press the OK button to accept your 
setting and then press the MENU 
button or EXIT button.
• The factory default is [On].
HDMI
Component
LAN
Digital PC
Analog PC
USB
Normal
The menu is displayed for 10 
or 30 seconds.
Extended
The menu is displayed for 3 
minutes.
Item
[Normal] [Extended]
The display time of the 
following screens
- MENU screen
30 
seconds
3 
minutes
- Keystone adjustment 
)
- Keystone reset (
)
- D.image shift 
adjustment (
)
- D.image shift reset 
)
- Aspect (
- Image Mode (
)
- Volume adjustment 
)
- Gamma correction 
)
10 
seconds
3 
minutes
HDMI
Component
LAN
Digital PC
Analog PC
USB
On
The prepare lamp message and the 
lamp warning are displayed.
Off
The prepare lamp message and the 
lamp warning are not displayed.
When it is time to replace the lamp, 
the LAMP indicator on the projector 
will flash, and lamp replacement 
(
) is recommended at this time.