Canon WUX400ST Manuel D’Utilisation

160

Here, you can use the following settings in the edge blending menu.

Select the position where the images overlap.
When you are adjusting the left image, this area is along the right edge of the 
image. In the edge blending window, select [Right] > [Adjust].

Set [Marker] to [On].
Marker lines are projected on the images. The red marker indicates the start 
position for adjustment, and the green marker, the end position.

Does not blend overlapping areas.

Displays the menu for blending overlapping 
areas.

Off

Projects an image with no correction.

Adjust Marker

Off Hides the markers.

On Displays markers showing the adjustable 

blending area, with one line indicating the start 
position (in red) and another, the end position (in 
green).

Start position

Moves the marker for the start position.

Width

Specifies the width between the start and end 
markers.

Reset

Resets the marker settings.

Adjusts the black level of non-overlapping image 
areas. (

)

Resets any adjustments you have made.

• If you have already completed edge blending settings, selecting [Adjust] will apply 

them.

• To restore the default settings before adjustment, select [Reset].

By default, the green and red markers are displayed in the same position, so only the red 
marker is visible.

Overlapping area

Left image

Right image