Canon WUX400ST Manuel D’Utilisation

194

■ Error Notification Mails

The messages shown in the following error list are sent when an error occurs in the 
projector.

Errors related to 
temperature

Error name

Temperature abnormality

Text

The temperature inside the projector is too high for some 
reason or the outside air temperature is higher than the 
specified one.
If the problem is inside the projector, check whether the 
projector is installed and operated normally, turn off the 
projector to cool its inside, and retry projection. If the same 
warning occurs again, the projector may be defective. 
Contact your dealer.

Errors related to 
the lamp

Error name

Faulty lamp

Text

The lamp has burnt out. Replace the lamp with a new one. 
If the same warning occurs again, the lamp drive circuit 
may be defective. Contact your dealer.

Errors related to 
the fan

Error name

Faulty cooling fan

Text

The cooling fan or another component may be defective. 
Contact your dealer.

Errors related to 
the air filter

Error name

Faulty air filter unit

Text

The air filter unit is not installed properly.
Check whether the air filter unit is installed properly. 
If it is installed properly, the air filter unit detection switch 
may be defective. Contact your dealer.

Errors related to 
the power

Error name

Faulty power supply

Text

The voltage of part of the power supply is abnormally high 
or any other problem has occurred in the power supply. 
Contact your dealer.