Canon WUX400ST Manuel D’Utilisation

210

To use the NMPJ function, you must install the NMPJ application.
Instructions in this manual are for installation in a Windows 7 environment.

Application system requirements are as follows.

Core 2 Duo P8600, 2.4 GHz or higher (32- or 64-bit)

1 GB or more

32 GB or more

1024x768 min. resolution

Windows XP Professional SP3
Windows Vista Business SP2
Windows 7(Home/Professional/Ultimate) SP1
* Windows XP and Vista compatibility is limited to 32-bit editions.
* Both 32- and 64-bit editions of Windows 7 are supported.

In TCP/IP network environments, projectors can be connected to 
computers via the following LAN connections.
Wired LAN (1000BASE-T, 100BASE-TX)

Cannot be installed on computers without a minimum resolution of 
1024x768. Additionally, operation is not ensured if the resolution is 
switched to less than 1024x768 after installation.

• Operation is not ensured in other operating systems or editions.
• Menus are in English in all cases, except in Japanese and Simplified 

Chinese versions of the application.

• Operation is not ensured in operating systems other than English, 

Japanese, or Simplified Chinese OSes.

• Operation is not ensured in Windows 8.

• Although the application also supports computer-projector 

communication over a router, operation is only ensured over one 
router hop. Additionally, to use Broadcast mode (

) with 

projectors in other subnets, the router must support IPv4 multicast 
routing. Note that the router must be set up to route multicast 
addresses used by the application.

• If you are using an Aero style in Windows, this message may be 

displayed: “Do you want to change the color scheme to improve 
performance?”