Canon WUX400ST Manuel D’Utilisation

23

Sa
fe

ty

 In

str

u

ctions

As this section contains important safety-related information, be sure to read the 
following carefully beforehand in order to use your projector correctly and safely.

If the following situations occur, turn the power off, remove the power plug from the 
power outlet and contact the Canon Customer Support Center. Failure to do so could 
cause a fire or result in an electric shock.

• If smoke is emitted
• If an unusual smell or noise is emitted
• If a loud noise is heard and the lamp turns off
• If water or other liquid has entered the projector
• If metal or any other foreign material has entered the projector
• If the projector is knocked over or dropped and the cabinet is damaged

Pay attention to the following points for handling the power cord. Failure to do so may 
cause a fire, electric shock or personal injury.

• Do not place any objects on the power cord and do not allow it to become 

trapped under the projector. The power cord may be damaged.

• Do not cover the power cord with a carpet.
• Do not excessively bend, twist, pull or make modifications to the power cord.
• Keep the power cord away from heaters and other sources of heat.
• Do not use the power cord when it is bent finely, coiled or bundled.
• Do not use a damaged power cord. If your power cord is damaged, contact 

the Canon Customer Support Center.

• Do not use any power cord other than the type that is included with this 

projector.

• Be sure to connect the ground wire of the power cord to ground. Failure to 

do so could result in an electric shock.

• Be sure to connect the ground wire before connecting the power plug to the 

outlet. Also when you disconnect the ground wire, be sure to unplug the 
power plug from the outlet beforehand.