Canon LV-8320 Manuel D’Utilisation

37

Select 

Digital zoom +. The On-Screen Menu 

disappears and 

D. zoom + appears. Press the 

OK button to expand the image size. Use the 

Point ▲▼◄► buttons to pan the image. The 

Panning function can work only when the image 

is larger than the screen size. A projected image 

can be also expanded by pressing the D.ZOOM 

+ 

or the OK button. 

To exit the Digital zoom +/– mode, press any 

button except the D.ZOOM 

+/–, OK and Point 

buttons.

Select 

Digital zoom –. The On-Screen Menu 

disappears and 

D. zoom – appears. Press 

the OK button to compress image size. The 

projected image can be also compressed by 

pressing the D.ZOOM 

– or the OK button.  

To return to the previous screen size, select a 

screen size from the Screen Size Adjustment 

Menu or select an input source from the Input 

Source Selection Menu (see page 29) again, 

or adjust the screen size with the D.ZOOM 

+/– 

buttons.



  •  The minimum compression ratio is limited 

depending on the input signal, when the Keystone 

function is working or when the custom is selected 

for the screen size.

  • 

True and Digital zoom +/– are disabled and 

cannot be displayed when 

480i, 575i, 480p 575p, 

720p,1035i or 1080i is selected in the PC System 

Menu (p.30).

  • 

Digital zoom +/- cannot be selected when True is 

selected.

  •  The minimum compression ratio is limited at 

Normal screen size.

  •  When the 16:9 function is selected on Screen 

aspect menu, 16:9 is not available in the PC and 

AV screen (pp.36, 49).

When this function is set to 

On, the picture 

will be top/ bottom and left/right reversed. This 

function is used to project the image from a 

ceiling-mounted projector.

When this function is set to 

On, the picture will 

be left/right reversed. This function is used to 

project the image from rear of the screen.

To reset the adjusted data, select Reset and 

press the OK button. A confirmation box appears 

and then select Yes. All adjustments will return 

to their previous figures.

This function is used to adjust keystone 

distortion of the  projected image. Use the Point 

▲▼ buttons to choose the item you want to 

adjust.

    To correct keystone distortion, press the OK 

button.  

Keystone appears on the screen. Use the 

Point ▲▼ buttons to correct keystone 

distortion (p.25).

    To store or reset the keystone correction, 

press the Point ► button.

Store .......... Keep the keystone correction 

even when the AC power cord is 

unplugged.

    

Reset .......... Release the keystone correction 

when  the AC  power cord is 

unplugged.

This function is used to project the image to a 

4:3 or 16:9 projection screen.

Default (16:10) ....16:10 is the aspect of the 

                              LCD panel. The original 

                              Screen Menu is available.

16:9 ..... Set to a 16:9 projection 

                              screen.

                  

4:3 ......Set to a 4:3 projection screen.