Canon LV-8320 Manuel D’Utilisation
39
VIDEO Input
VIDEO Input
Choose
COMPUTER 1(COMPONENT) or COMPUTER 1 (SCART) by pressing the COMPONENT or
the COMPUTER 1 button on the remote controller. Choose
HDMI by pressing the HDMI button on the
remote controller or you can press the INPUT button on the top control to choose the desired input
source.
Before using these buttons, correct input source should be selected through Menu operation as
described below.
1
Input Menu
2
Use the Point ▲▼ buttons to select
COMPUTER 1 and then press the Point ►
button.
Input Source Selection (COMPONENT, SCART, HDMI)
When the input source is coming
from video equipment connected
to the COMPUTER IN 1/
COMPONENT IN terminal with a
COMPONENT-VGA Cable, select
COMPONENT.
COMPONENT
When the input source is coming
from video equipment connected
to the COMPUTER IN 1/
COMPONENT IN terminal with a
Scart-VGA Cable, select
SCART.
SCART
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼ buttons
to select
Input and then press the Point ►
button or the OK button.
Note:
When the Auto input function is set to
On 1 or On
2, the input signal will be searched automatically
(p.47).
COMPUTER 1 button
Remote controller
3
Use the Point ▲▼ buttons to select
COMPONENT or SCART and then press the
OK button.
COMPUTER 1 (ANALOG PC)
COMPUTER 1 (SCART)
COMPONENT button
COMPUTER 1 (COMPONENT)
Direct Operation
Menu Operation
Press the Point ▲▼ buttons
to select
COMPONENT or
SCART.
INPUT button
Top Control
HDMI button
HDMI
When video input signal is
connected to the HDMI jack,
select
HDMI.