Sanyo WM5500L Manuel D’Utilisation

When replacing the lens or using an optional lens, install the lens by following the instructions below. Ask the 
sales dealer for detailed information of the optional lens specifications. 

Shift the lens to the center position by using the Lens 
shift function (p.27).

Lens release button

CAUTION
Be careful when handling the lens. Do not drop.

While pressing the Lens release button on the top
of the cabinet, turn the lens counterclockwise until
it stops and pull it out slowly from the projector.

Turn off the projector and unplug the AC power cord. 

  ●  Do not touch or remove any parts except the lens and related parts. It may result in   

  malfunctions, electrical shock, fire hazard or other accidents.

  ●  Before installing or replacing the lens, check that the Model No. of the Projection Lens  

  matches to the projector.

  ●  For details of the lens and installation, contact the sales dealer where you purchased the 

  projector.

Fit the lens to the projector by aligning the red dot on 
the lens with the red dot of the projector.

Slowly turn the lens clockwise until it clicks. Make sure 
that the lens is fully inserted to the projector.

Remove the lens mount cover

.

CAUTION
Do not press the lens release button when attaching 
the lens.

Red dots