Sanyo WM5500L Manuel D’Utilisation
The input source changes each time you press the INPUT button on the side control or the remote control as follows:
Input 1→ Input 2→ Input 3 → ...
Before using the INPUT button on the side control or the remote control, you must select a correct input source by On-
Screen Menu and the latest input source will be displayed.
Input 1→ Input 2→ Input 3 → ...
Before using the INPUT button on the side control or the remote control, you must select a correct input source by On-
Screen Menu and the latest input source will be displayed.
Input Selection
Press the INPUT 1, INPUT 2, or INPUT 3 button on the remote control. The input source appears on the screen as you
press each button. Select the connected input source.
press each button. Select the connected input source.
INPUT 1 button
Input 1
RGB (PC analog)
RGB (Scart)
HDMI
INPUT button
Input
Video
y,Pb/Cb,Pr/Cr
RGB
INPUT button
Input
Video
y,Pb/Cb,Pr/Cr
S-video
Side Control
Remote Control
INPUT button
*
* Only the Input button function is set Mode 1 in the Setting menu, the INPUT button is used for switching input source.
(p.51)
INPUT button
*
Direct Operation
Remote Control Operation
Side Control/Remote Control Operation
INPUT 1// buttons
Remote Control