Manualsbrain.com
  1. Manuels
  2. Marques
  3. Sanyo
  4. WM5500L
  5. Manuel D’Utilisation

Sanyo WM5500L Manuel D’Utilisation

Télécharger
Page de 92
5
When the video input signal is connected to the 
Y-Pb/Cb-Pr/Cr jacks, select y,Pb/Cb,Pr/Cr.
When the video input signal is connected to the 
VIDEO jack, select Video.
When the video input signal is connected to the 
S-VIDEO jack, select S-video.
When connecting to video equipment, select the type of Video source 
in the Source Select Menu. 
When the video input signal is connected to the 
Y-Pb/Cb-Pr/Cr jacks, select y,Pb/Cb,Pr/Cr.
When the video input signal is connected to the 
VIDEO jack, select Video.
When connecting to video equipment, select the type of Video source 
in the Source Select Menu. 
Video
y,Pb/Cb,Pr/Cr
Video
S-video
Input Selection
When connecting to video equipment, select the type of Video 
source in the Source Select Menu. 
INPUT 1 MENU
HDMI
RGB(Scart)
When scart video equipment is connected to the INPUT 1 
(ANALOG) terminal, select RGB (Scart).
When the video signal is connected to the HDMI terminal, 
select HDMI.
INPUT  MENU
INPUT  MENU
y,Pb/Cb,Pr/Cr
1
Press the MENU button to display the On-Screen Menu. Use 
the Point ▲▼ buttons to select Input and then press the 
Point ► or the SELECT button. 
Use the Point ▲▼ buttons to select the desired input and 
then press the Point ► button to access the submenu items. 
Use the Point ▲▼ buttons to select the desired source and 
then press the SELECT button.
Video Input Source Selection
Menu Operation
Note:
 • When the video input signal is connected to the Y-Pb/Cb-Pr/Cr jacks,
Y,Pb/Cb,Pr/Cr takes precedence of RGB.
 • Y,Pb/Cb,Pr/Cr input can accept the component signal and the analog
RGB signal. When analog RGB signal is not recognized in Y,Pb/Cb,Pr/
Cr input source, set to RGB input manually.
WHEN SELECTING INPUT 1 (COMPUTER INPUT 
TERMINALS )
WHEN SELECTING INPUT  (5 BNC INPUT jACKS )
WHEN SELECTING INPUT  (AV TERMINALS )