Sanyo WM5500L Manuel D’Utilisation

PC system can also be selected manually.

The PC System Menu  
Selected system is    
displayed.

Press the MENU button to display the On-Screen Menu. Use 
the Point ▲▼ buttons to select Input and then press the Point 

► or the SELECT button. 

Use the Point ▲▼ buttons to select Systerm and then press 

the Point ► or the SELECT button.

Use the Point ▲▼ buttons to select the desired system and 
then press the SELECT button.

Systems in this dialog box 
can be selected.

Customized Mode (1-10) set in 
the PC adjust Menu (pp.38-39).

This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC adjustment. If a 
computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper 
image without any additional settings. (Signal formats provided in this projector are shown on pages 82-83)

One of the following messages may appear when:

The projector cannot recognize the connected signal 
conforming to the provided PC Systems. Auto is 
displayed on the System Menu box and the Auto PC 
adjustment function works to display proper images. 
If the image is not projected properly, a manual 
adjustment is required (pp.38-39).

There is no signal input from the computer. Check the 
connection between your computer and the projector. 
(See “Troubleshooting” on pp.73-75.)

The preset system is manually adjusted in the PC 
adjust Menu. The adjusted data can be stored in Mode 
1-10 (pp.38-39).

PC Systems provided in this projector is chosen.  The 
projector chooses a proper system provided in the 
projector and displays it.  

*Mode 1 and SVGA 1 are examples.