EIKI LC-WB40N Manuel D’Utilisation

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical 

positions to conform to your computer.

Move the red frame pointer 

to Auto PC Adj. and press 

the SELECT button.

“Please wait...” appears 

while the Auto PC 

adjustment is in process.

PC Adjust Menu icon

The Auto PC adjustment function can be operated directly 

by pressing the AUTO PC button on the remote control.

The adjusted parameters from the Auto PC Adjustment can 

be stored in the projector. Once the parameters are stored, 

the setting can be done just by selecting a Mode (1–5) in the 

PC System Menu (see page 32). See also “Store” on page 

35.

✔

  • Fine sync, Total dots, Horizontal and Vertical position of 

some computers cannot be fully adjusted with the Auto 

PC Adjustment function. When the image is not provided 

properly with this operation, manual adjustments are 

required (pp.34–35).

  • The Auto PC Adjustment cannot be operated when 480i, 

575i, 480p, 575p, 720p,1035i, or 1080i is selected in the 

PC System Menu (p.32), or when the signal is coming 

from the DVI-terminal. 

Press the MENU button to display the On-Screen 

Menu. Use the Point 

7 8

 buttons to move the red 

frame pointer to the PC Adjust Menu icon.

Use the Point 

ed

 buttons to move the red frame 

pointer to Auto PC Adj. and then press the SELECT 

button twice.