EIKI LC-WB40N Manuel D’Utilisation

Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector.  

Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The 

projector has five independent memory areas to store those parameters manually adjusted. It allows you to 

recall the setting for a specific computer. 

Press the MENU button to display the On-Screen 

Menu. Use the Point 

7 8

 buttons to move the red 

frame pointer to the PC Adjust Menu icon.

Use the Point 

ed

 buttons to move the red frame 

pointer to the desired item and then press the SELECT 

button to display the adjustment dialog box. Use the 

Point 

7 8

 buttons to adjust the setting value.

Move the red frame pointer 

to the desired item and press 

the SELECT button.

PC Adjust Menu icon

Press the SELECT button 

here to adjust other items. 

Use the Point 

7 8

 buttons to 

adjust the value.

Status (Stored/Free) of the 

selected Mode.

Selected Mode

Press the SELECT button at 

Current mode to show the 

information of the connected 

computer.

Use the Point 

7 8

 buttons to adjust the value, eliminating a 

flicker from the image displayed (from 0 to 31).

Use the Point 

7 8

 buttons to adjust the number of total dots 

in one horizontal period to match your PC image.

Use the Point 

7 8

 buttons to adjust the horizontal picture 

position.

Use the Point 

7 8

 buttons to adjust the vertical picture 

position.

Press the SELECT button to show H-sync freq. and V-sync 

freq. of the connected computer. 

Use the Point 

7 8

 buttons to adjust the clamp level. When 

the image has dark bars, try this adjustment.