Acer S5201B Manuel D’Utilisation
37
3. How to use Download Tool :
Software Installation, Un-installation :
Unzip the “Q-EDID” program files in the same directory.
Install Q-EDID tool : Execute “Install Q-EDID.BAT” to install & register EDID Board
Install Q-EDID tool : Execute “Install Q-EDID.BAT” to install & register EDID Board
into the computer.
Un-install Q-EDID tool : If you want to uninstall this tool, execute “Uninstall
Q-EDID.BAT”, then it will remove EDID Board from the computer.
How to use Download Tool :
(1) Execute EDID Tools V0.16:
(1) Execute EDID Tools V0.16:
1. Run “Q-EDID-V016.exe”.
2. Program will appear as below picture.
(2) Write EDID:
• When write D-SUB/DVI EDID:
1. EDID Type Selection : Choose ‘‘EDID 128 Bytes’’.
2. Open Files : Click “Open File” to select file “*.DDC”
1. EDID Type Selection : Choose ‘‘EDID 128 Bytes’’.
2. Open Files : Click “Open File” to select file “*.DDC”
(Note : If your DDC file name is not like “*.DDC” (e.g. “*.2dc”), please rename it to “*.DDC”)
3. Write EDID : Click “Write EDID”, and it will execute writing process.
4. While complete, it will show message as ’’Write EDID OK…’’.
4. While complete, it will show message as ’’Write EDID OK…’’.
(Note : Check cable connection before write. It will show Write EDID OK even the connection
is not stable.)