Acer S5201B Manuel D’Utilisation
39
Serial Number Upgrade SOP
Hardware required
1. Standard RS232 Download cable
2. Personal computer or laptop computer
2. Personal computer or laptop computer
Software required
1. Acer_Service_Tool(Data)_3.1.exe
When need to use this Serial Number Upgrade program:
When it’s time to replace Main board for repair, it’s necessary to rewrite original S/N and
some adjustment values into new Main board by the following process.
Upgrade procedure
1. Prepare the download equipment: RS232 cable connect to PC and projector
2. Plug power cord into projector, and the projector will be in stand by mode.
3. Execute “Acer_Service_Tool(Data)_3.1.exe”, and it will appear as below picture.
4. Change to connected COM port and Click “Port Open” icon.
2. Plug power cord into projector, and the projector will be in stand by mode.
3. Execute “Acer_Service_Tool(Data)_3.1.exe”, and it will appear as below picture.
4. Change to connected COM port and Click “Port Open” icon.
5. Read data from original Main board:
Click “Read system Data”, and it will read the Adjustment data (except Auto
keystone data) & Serial Number from projector and show the “Read complete”
message in information block.
keystone data) & Serial Number from projector and show the “Read complete”
message in information block.
4-1. Change to
connected COM Port
number
connected COM Port
number
4-2. Click “Port
Open”
Open”
5-1. Click this icon to
read all data
read all data
5-2. Show “Read
Complete!”
Complete!”