Canon WX6000 Manuel D’Utilisation
123
Setting Various Functions
User’s Manual
Settin
g
Functions from Menus
Prohibiting Operations
[Key lock]
You can lock the projector to prevent its
operation from either the main unit or
remote control.
MENU > [System settings] > [Key lock]
MENU > [System settings] > [Key lock]
Press the
OK button to accept your setting
and then press the
MENU button or EXIT
button (WX6000 / SX6000).
• [Off] is the factory default.
HDMI
Component
Digital PC
Analog PC
Off
Disables the key lock.
Main
unit
unit
Operation is not possible using the
main unit.
Use the remote control.
main unit.
Use the remote control.
Remote
control
control
Infrared remote control operations
can no longer be performed. Use the
main unit button. If using the
WX6000 / SX6000, this can also be
set by connecting a cable. (
can no longer be performed. Use the
main unit button. If using the
WX6000 / SX6000, this can also be
set by connecting a cable. (
The key lock function becomes effec-
tive from the moment the
tive from the moment the
OK button is
pressed after selecting [Main unit] or
[Remote control]. Control via the item
selected will then be disabled.
[Remote control]. Control via the item
selected will then be disabled.
To Unlock Key Lock Function
Turn off the projector and unplug the
power plug. Hold down the
Turn off the projector and unplug the
power plug. Hold down the
OK button
on the main unit and connect the
power plug. Keep holding down the
power plug. Keep holding down the
OK button until a beep sounds. The
key lock will be unlocked.
key lock will be unlocked.