Canon WX6000 Manuel D’Utilisation

124

[Remote control]

When using multiple projectors at the 
same time (maximum 4), you can assign a 
different channel to each remote control so 
that each operates independently.
For the WX6000 / SX6000, set this when 
performing infrared operations.

Select the main unit channel.

MENU > [System settings] > [Remote control]

MENU > [System settings] > [Remote control]

Press the 

OK button to accept your setting 

and then press the 

MENU button or EXIT 

button (WX6000 / SX6000).

• The factory default is [Independent] for 

both projector and remote control.

• After changing the channel on the menu, 

be sure to change the channel of the 
remote control too.

• If a cable is connected, it is not necessary 

to perform remote control channel setting.

Selecting a Channel on the Remote control
You can change the channel on the 
remote control as follows.

HDMI

Component

Digital PC

Analog PC

Ch1
Ch2
Ch3
Ch4

Select the remote control 
channel to use with this 
projector.

Independent

Remote controls set to any 
channel can be used.

Ch1

Press and hold the 

OK button 

and [ ] button at the same time 
for 3 seconds.

Ch2

Press and hold the 

OK button 

and [ ] button at the same time 
for 3 seconds.

Ch3

Press and hold the 

OK button 

and [ ] button at the same time 
for 3 seconds.

Ch4

Press and hold the 

OK button 

and [ ] button at the same time 
for 3 seconds.

Inde-
pendent

Press and hold the 

OK button 

and 

MENU button at the same 

time for 3 seconds.

Ch1

Press and hold the 

Ch button 

and 

1 button at the same time 

for 3 seconds.

Ch2

Press and hold the 

Ch button 

and 

2 button at the same time 

for 3 seconds.

Ch3

Press and hold the 

Ch button 

and 

3 button at the same time 

for 3 seconds.

Ch4

Press and hold the 

Ch button 

and 

4 button at the same time 

for 3 seconds.

Inde-
pendent

Independent  Press and hold the 

Ch button and 0 button at the 
same time for 3 seconds.