Canon WX6000 Manuel D’Utilisation
182
Setting Up the Network
■Setting Basic Information [Network]
From [Network] in the settings window, you can log into the web screen and set basic
network information. For the setting procedure, refer to
network information. For the setting procedure, refer to
Item
Explanation
Factory default setting
Password
User name
When logging into the web screen,
enter the user name in 1-byte
alphanumeric characters and
symbols (4 -15 characters).
enter the user name in 1-byte
alphanumeric characters and
symbols (4 -15 characters).
root
New password
When logging into the web screen,
enter the password in 1-byte
alphanumeric characters and
symbols (4 -15 characters).
enter the password in 1-byte
alphanumeric characters and
symbols (4 -15 characters).
system
Confirm new password
For confirmation, enter the same
password that you entered in [New
password].
password that you entered in [New
password].
system
TCP/IP
DHCP
Select whether to turn the DHCP
function on or off. If the function is
on, because the IP address is
acquired from the server, it is not
possible to enter the [IP address],
[Subnet mask], and [Default gate-
way].
function on or off. If the function is
on, because the IP address is
acquired from the server, it is not
possible to enter the [IP address],
[Subnet mask], and [Default gate-
way].
OFF
IP address
Enter the IP address of the projec-
tor in 1-byte numbers.
tor in 1-byte numbers.
192.168.254.254
Subnet mask
Enter the subnet mask in 1-byte
numbers.
numbers.
255.255.255.0
Default gateway
Enter the default gateway IP
address in 1-byte numbers.
address in 1-byte numbers.
0.0.0.0
If settings related to TCP / IP were changed, it is necessary to disconnect and reconnect to
the network. If the network subnet mask was changed, select [Subnet mask] in the above
window and set the new subnet mask.
the network. If the network subnet mask was changed, select [Subnet mask] in the above
window and set the new subnet mask.