Canon WX6000 Manuel D’Utilisation
Setting Up the Network
184
■Mail Authentication Settings [Mail auth]
From [Mail auth] in the settings window, you can configure the settings for authentica-
tion of mail that is sent when an error occurs. For the setting procedure, refer to
tion of mail that is sent when an error occurs. For the setting procedure, refer to
.
Item
Explanation
Factory default set-
ting
Mail authentication
Select the mail authentication method.
If OFF is selected, the other mail
authentication settings cannot be
changed.
If OFF is selected, the other mail
authentication settings cannot be
changed.
OFF
User name
Enter the user name to use for mail
authentication in 1-byte alphanu-
meric characters and symbols (1 - 63
characters).
authentication in 1-byte alphanu-
meric characters and symbols (1 - 63
characters).
<Blank>
Password
Enter the password for mail authenti-
cation in 1-byte alphanumeric charac-
ters and symbols (1 - 63 characters).
cation in 1-byte alphanumeric charac-
ters and symbols (1 - 63 characters).
<Blank>
Confirm password
For confirmation, enter the same
password as you entered in [Pass-
word].
password as you entered in [Pass-
word].
<Blank>
POP3 server IP address
Enter the POP3 server IP address in
1-byte numbers.
1-byte numbers.
0.0.0.0
POP3 server port number
Enter the POP3 server port number in
1-byte numbers (1 - 65535).
1-byte numbers (1 - 65535).
110
POP before SMTP response time
Enter the wait time from POP3 authen-
tication to SMTP authentication (units:
milliseconds) using 1-byte numbers
(0 - 9999 milliseconds).
tication to SMTP authentication (units:
milliseconds) using 1-byte numbers
(0 - 9999 milliseconds).
300