Canon WX6000 Manuel D’Utilisation
Selecting an Input Signal (INPUT)
60
■Selecting an Input Signal
1
Press the INPUT button to display the window shown below.
The currently active input signal is marked with a circle and highlighted in orange.
An input signal that is ready for projection is displayed in white. When no signal is
received, it is displayed in gray. However [HDMI] and [DVI-D] (WUX5000 / WUX4000)
(Digital PC), or [Digital PC] (WX6000 / SX6000) may be displayed in gray even if they
are ready for projection.
An input signal that is ready for projection is displayed in white. When no signal is
received, it is displayed in gray. However [HDMI] and [DVI-D] (WUX5000 / WUX4000)
(Digital PC), or [Digital PC] (WX6000 / SX6000) may be displayed in gray even if they
are ready for projection.
2
You can switch the available input signal types by pressing the INPUT button.
• You can select the target input signal with [ ] / [ ].
• Only the input signals displayed in white can be selected.
• Only the input signals displayed in white can be selected.
3
Press the OK button to confirm the input signal type.
Change the input signal with the input signal buttons. (WX6000 / SX6000)
For WX6000 / SX6000, you can also switch to the input signal you want by pressing
the button that corresponds to that signal.
the button that corresponds to that signal.
Remote control
Projector
Remote control
Remote control