Canon WX6000 Manuel D’Utilisation
Adjusting the Image
62
■Mac OS X
1
Open the Apple Menu and select [System
Preferences].
Preferences].
2
In the [System Preferences] window, click
the [Displays] icon to display the Display
window.
the [Displays] icon to display the Display
window.
3
Select the [Display] tab and select the res-
olution closest to the maximum output sig-
nal resolution of the computer from the
[Resolutions] list.
olution closest to the maximum output sig-
nal resolution of the computer from the
[Resolutions] list.
4
Close the [System Preferences] window.
AUTO PC
If the image display is shifted or there is flickering of the screen when [Analog PC]
(WUX5000 / WUX4000) or [Analog PC-1] [Analog PC-2] (WX6000 / SX6000) is selected,
press the
(WUX5000 / WUX4000) or [Analog PC-1] [Analog PC-2] (WX6000 / SX6000) is selected,
press the
AUTO PC button to adjust the projector to the optimal condition.
The adjustment results will be stored. If the projector is used again with the same com-
puter, when the input signal is selected the image will be projected automatically under
the same conditions that were previously adjusted.
puter, when the input signal is selected the image will be projected automatically under
the same conditions that were previously adjusted.
■Performing the Auto PC Function
Press the
AUTO PC button to perform projector adjustment.
If the projected image was not properly adjusted with the [AUTO PC] function, perform the
following steps.
• From [Input signal select], select an input signal type based on the resolution of the com-
following steps.
• From [Input signal select], select an input signal type based on the resolution of the com-
puter. (
• If the adjustment is still insufficient, from [Input signal settings] select [Total dots], [Track-
ing], [Horizontal position], [Vertical position], [Horizontal pixels] and [Vertical pixels] to
make adjustments. (
make adjustments. (
-
• For the signal types supported by the projector, see the table on
Remote control