Canon WX6000 Manuel D’Utilisation

98

[Vertical pixels]

You can adjust the number of the pixels in 
the vertical direction if the screen is too 
long or too short in the vertical direction.

MENU > [Display settings] > [Input signal set-
tings] > [Vertical pixels]

MENU > [Input settings] > [Input signal 
settings] > [Vertical pixels]

Use [ ] / [ ] to select a value.

When you have completed the adjust-
ment, press the 

OK button to accept your 

setting and then press the 

MENU button 

or 

EXIT button (WX6000 / SX6000).

• Perform this adjustment if the [AUTO PC] 

function (

) cannot adjust the projected 

image correctly.

[HDMI input level]

You can select this as required when you 
project visual software with an HDMI sig-
nal.

MENU > [Display settings] > [HDMI input level]

MENU > [Input settings] > [HDMI input level]

Press the 

OK button to accept your setting 

and then press the 

MENU button or EXIT 

button (WX6000 / SX6000).

• [Auto] is the factory default.
• You can select this only when the type of sig-

nal sent from AV equipment is RGB.

• The signal level is selected automatically in 

[Auto] mode. (Some AV equipment may not 
support this.)

• If the HDMI output of your AV equipment 

allows switching between [Normal] and 

HDMI

Component

Digital PC

Analog PC

Screen

HDMI

Component

Digital PC

Analog PC