Canon WX6000 用户手册
Setting Display Status
98
Adjust Input Signal Type
(Analog PC) Vertical Pixels
(Analog PC) Vertical Pixels
[Vertical pixels]
You can adjust the number of the pixels in
the vertical direction if the screen is too
long or too short in the vertical direction.
the vertical direction if the screen is too
long or too short in the vertical direction.
MENU > [Display settings] > [Input signal set-
tings] > [Vertical pixels]
tings] > [Vertical pixels]
MENU > [Input settings] > [Input signal
settings] > [Vertical pixels]
settings] > [Vertical pixels]
Use [ ] / [ ] to select a value.
When you have completed the adjust-
ment, press the
ment, press the
OK button to accept your
setting and then press the
MENU button
or
EXIT button (WX6000 / SX6000).
• Perform this adjustment if the [AUTO PC]
function (
) cannot adjust the projected
image correctly.
Selecting HDMI Input
Level
Level
[HDMI input level]
You can select this as required when you
project visual software with an HDMI sig-
nal.
project visual software with an HDMI sig-
nal.
MENU > [Display settings] > [HDMI input level]
MENU > [Input settings] > [HDMI input level]
Press the
OK button to accept your setting
and then press the
MENU button or EXIT
button (WX6000 / SX6000).
• [Auto] is the factory default.
• You can select this only when the type of sig-
• You can select this only when the type of sig-
nal sent from AV equipment is RGB.
• The signal level is selected automatically in
[Auto] mode. (Some AV equipment may not
support this.)
support this.)
• If the HDMI output of your AV equipment
allows switching between [Normal] and
HDMI
Component
Digital PC
Analog PC
Screen
HDMI
Component
Digital PC
Analog PC