Christie Digital Systems DWX555-GS Manuel D’Utilisation

GS Series User Manual

020-000724-01 Rev. 1 (05-2014)

5-1

5.

TROUBLESHOOTING

If you are unable to resolve an issue using the information provided in this 
section, contact your reseller or service center.

-

No image appears 
on-screen

-

Make sure all the cables and power connections are 
correctly and securely connected See "Installation".

-

Check if the Light Status LED is in Green.

-

Make sure you have removed the lens cap and the 
projector is switched ON.

• 

Partial, scrolling or 
incorrectly 
displayed image

-

Press "AUTO" on control panel or on remote control.

-

If you are using a PC (for Windows 95, 98, 2000, XP, 
Windows 7):

1. Click the "My Computer" > "Control Panel"  and then 

double - click "Display".

2. Select the "Settings" tab.

3. Verify that your display resolution setting is lower than 

or equal to WUXGA (1920 × 1200).

4. Click on the "Advanced Properties" button. If the 

projector is still not projecting the whole image, change 
the monitor display:

4.1 Verify the resolution setting is lower than or equal to 

WUXGA (1920 × 1200).

4.2 Select the "Change" button under the "Monitor" tab.

4.3 Click on "Show all devices". Next, select "Standard 

monitor types" under the SP box; choose the 
resolution mode you need under the "Models" box.

4.4 Verify that the resolution setting of the monitor 

display is lower than or equal to WUXGA (1920 × 
1200).