Christie Digital Systems DWX555-GS ユーザーズマニュアル
Section 5: TROUBLESHOOTING
GS Series User Manual
020-000724-01 Rev. 1 (05-2014)
5-1
5.
TROUBLESHOOTING
If you are unable to resolve an issue using the information provided in this
section, contact your reseller or service center.
section, contact your reseller or service center.
Problem
Solution
-
No image appears
on-screen
on-screen
-
Make sure all the cables and power connections are
correctly and securely connected See "Installation".
correctly and securely connected See "Installation".
-
Check if the Light Status LED is in Green.
-
Make sure you have removed the lens cap and the
projector is switched ON.
projector is switched ON.
•
Partial, scrolling or
incorrectly
displayed image
incorrectly
displayed image
-
Press "AUTO" on control panel or on remote control.
-
If you are using a PC (for Windows 95, 98, 2000, XP,
Windows 7):
Windows 7):
1. Click the "My Computer" > "Control Panel" and then
double - click "Display".
2. Select the "Settings" tab.
3. Verify that your display resolution setting is lower than
or equal to WUXGA (1920 × 1200).
4. Click on the "Advanced Properties" button. If the
projector is still not projecting the whole image, change
the monitor display:
the monitor display:
4.1 Verify the resolution setting is lower than or equal to
WUXGA (1920 × 1200).
4.2 Select the "Change" button under the "Monitor" tab.
4.3 Click on "Show all devices". Next, select "Standard
monitor types" under the SP box; choose the
resolution mode you need under the "Models" box.
resolution mode you need under the "Models" box.
4.4 Verify that the resolution setting of the monitor
display is lower than or equal to WUXGA (1920 ×
1200).
1200).