Toshiba B-SX8T Manuel D’Utilisation

 

 

EO13-33002 

 

2.2 Parameter Setting

 

2-23 

This parameter is to choose a language in which the LCD message is displayed.   
When “<2>PARAMETER SET” appears, press the [PAUSE] key until the following display appears. 

 
 
 

Use the [FEED] or [RESTART] key to select a desired option. 

 
 
 
 
 
 
 
 
 
 

After selecting a language, press the [PAUSE] key. 
 
 

This parameter is to choose whether to activate the Auto Forward Wait function or not. 
This function, used in the cut mode, automatically feeds the media forward for about 14 mm if there is more 
than 1-second idle time after printing, to prevent the top edge of the media from curling. 
When “<2>PARAMETER SET” appears, press the [PAUSE] key until the following display appears. 
 
 
 
Use the [FEED] or [RESTART] key to select a desired option. 
 
 
 
 
 
When ON is selected, pressing the [PAUSE] key will result that the LCD Message Display shows the stop 
position fine adjustment value setting screen. 
 
 
 
 
 
 
 
 

[FEED] key: 

Pressing the [FEED] key one time causes a –0.1 mm change, up to –5.0 mm. 

 [RESTART] key: Pressing the [RESTART] key one time causes a +0.1 mm change, up to +5.0 mm. 

After selecting an auto forward wait, press the [PAUSE] key. 

<2>PARAMETER SET 
LCD   ENGLISH 

ENGLISH 

ITALIAN  

JAPANESE 

SPANISH 

DUTCH 

FRENCH 

GERMAN 

<2>PARAMETER SET 
FORWARD WAIT OFF 

FORWARD WAIT OFF 

Not activated 

FORWARD WAIT ON 

Activated 

POSITION  +5.0mm 

POSITION  -5.0mm 

<2>PARAMETER SET 
POSITION  +0.0mm 

POSITION  +0.0mm