Toshiba B-SX8T Manuel D’Utilisation

 

EO13-33002 

(Revision Date: Mar. 26, 2009) 

2.9 RFID Module Setting

 

2-76 

This parameter is to choose an RFID tag type to be used.  Available tag type is different depending on the 
RFID module type.  
When the RFID Module Type has been set to NONE 
 
 
 
Use the [FEED] or [RESTART] key to select a desired option. 
 
 
 
 
 
 
After selecting the RFID tag type to be used, press the [PAUSE] key. 
 
 
 
 
 
 
 

This parameter is to choose whether an error detection is performed or not before writing data on an RFID 
tag.  When “ON” is selected, data is written on an RIFD only when no error is detected. 
NOTE: This function is exclusively for Alien’s EPC CI Squiggle tag.  Choose “OFF” usually. 
When “ERR CHK   OFF” is displayed, press the [PAUSE] key. 
 
 
 
Use the [FEED] or [RESTART] key to select a desired option. 
 
 
 
 
 
 
 
 
 
After selecting the RFID error tag detection function to be used, press the [PAUSE] key. 

<10>RFID 
TAG         NONE 

TAG NONE 

TAG  EPC C1 Gen2 

Tag type 

Parameter for TPCL command 

RFID module type 

NONE 00 
EPC C1 Gen2 

24 

B-SX708-RFID-U2-EU-R, B-SX708-RFID-CN-R 

<10>RFID 
ERR CHK    OFF 

ERR CHK    OFF 

ERR CHK     ON 

Error tag detection is not performed.  A tag is read before 
writing data on it, but data is always written regardless of 
the header data of the tag. 

Error tag detection is performed. (Only when the header 
data of the RFID data is “A5A5”, data is written on the 
RFID tag.  This function is available only for Alien’s EPC CI 
Squiggle tag only.)