Canon iPF8400SE Manuel D’Utilisation
Number
Dimensions
3
355.6 mm (14.00 in)
4
431.8 mm (17.00 in)
5
515.0 mm (JIS B2 or B3)
6
594.0 mm (ISO A1 or A2) or 609.6 mm (24.00 in)
7
841.0 mm (ISO A0 or A1)
8
914.4 mm (36.00 in)
9
1030.0 mm (JIS B0 or B1)
10
1066.8 mm (42.00 in)
11
1117.6 mm (44.00 in)
6
Using the back of the Cleaning Brush, move the Switch to the side opposite ●, corresponding to the size of
the paper for printing.
In this case, note that you will move the switch in the opposite direction from the direction in step 4.
the paper for printing.
In this case, note that you will move the switch in the opposite direction from the direction in step 4.
Note
•
The Switch only moves number 1 and the number
that matches the paper size. Set all of the switches
where the number does not match the paper size in
switches number 2 and higher to the ● side.
that matches the paper size. Set all of the switches
where the number does not match the paper size in
switches number 2 and higher to the ● side.
7
Close the Top Cover.
The contrast becomes uneven during printing
The contrast becomes uneven during printing
Cause
Corrective Action
The paper feed amount is out of adjustment.
Adjust the feed amount.
(See "Adjusting the Feed Amount.")
(See "Adjusting the Feed Amount.")
The type of paper specified in the printer driv-
er does not match the type loaded in the
printer.
er does not match the type loaded in the
printer.
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.")
(See "Loading Rolls in the Printer.")
Make sure the same type of paper is specified in the printer driver as you have loa-
ded in the printer.
ded in the printer.
1.
Press the Stop button and stop printing.
2.
Change the type of paper in the printer driver and try printing again.
The contrast becomes uneven during printing
iPF8400SE
Troubleshooting
Problems with the printing quality
598