Canon iPF825 Manuel D’Utilisation

Follow the steps below to configure the NetWare network settings.

Start  the  web  browser  and  enter  the  following  URL  in  the  Location  (or  Address  )  box  to  display  the  RemoteUI
page.
http://printer IP address or name/
Example: http://xxx.xxx.xxx.xxx/

Select Administrator Mode and click Logon.

If a password has been set on the printer, enter the password.

Click Network in the Device Manager menu at left to display the Network page.

Click Edit in the upper-right corner of the NetWare group to display the Edit NetWare Protocol Settings page.

Refer to the NetWare Settings Items table to complete the settings.

NetWare Settings Items

Item

Details

Default
Setting

Specify the type of frame to use in NetWare.

Disabled

Activate this setting to use NCP Burst Mode.
This mode supports fast data transfer when printing in queue server
mode. Normally, leave the setting On.

On

Choose the print service.

NDS PSer-
ver

Select If Requested by Server to use packet signature.

Specify the name of a file server that has a NetWare print server.
(0–47 characters)

—

Specify the name of a NetWare print server.
(0–47 characters)

—

Set a password for the print server.
(0–20 characters)

—

Specify the interval to confirm jobs.
(1–15 seconds)

5

Specify the name of a NetWare print server.
(0–47 characters)

—

Specify the number of the printer connected to the NetWare print
server.
(0–15)

0

Network Setting 

 Network Setting (Windows) 

Configuring the Printer's NetWare Network Settings

iPF825