Canon iPF825 Manuel D’Utilisation

Item

Details

Default
Setting

Specify the name of an NDS tree that has a NetWare print server.
(0–32 characters)

—

Specify the name of a context that has a NetWare print server.
(0–255 characters)

—

Specify the name of a NetWare print server.
(0–64 characters)

—

Set a password for the print server.
(0–20 characters)

—

Specify the interval to confirm jobs.
(1–255 seconds)

5

Specify the name of a NetWare print server.
(0–47 characters)

—

Specify the number of the printer connected to the NetWare print
server.
(0–254)

0

Click OK to display the Network page.

To enable communication between the printer and computers on your network, specify the Ethernet frame type in your Net-
Ware environment.
Follow the steps below to specify the frame type by using imagePROGRAF Device Setup Utility or the printer Control
Panel.

Note

• You can specify the frame type by using RemoteUI if the printer's IP address is configured.

Important

• Before specifying the frame type, make sure the printer is on and connected to the network.
• For instructions on installing imagePROGRAF Device Setup Utility, 

.

Specifying the Frame Type Using imagePROGRAF Device Setup Utility

Start imagePROGRAF Device Setup Utility.

In the list of printers, select the printer to configure.

Choose Protocol Settings from the Printer menu.

In the NetWare Frame Type list, select the frame type.

Click ETHERNET II under Frame Type in TCP/IP.

Network Setting 

 Network Setting (Windows) 

iPF825

Specifying the Printer's Frame Type