Canon 2983B013AA Manuel D’Utilisation
Problems with the printing quality
Image edges are blurred or white banding occurs
Cause
Corrective Action
The Platen suction is too strong.
In the Control Panel menu, set VacuumStrngth to
Weakest.
(→P.621)
Weakest.
(→P.621)
The Printhead is set too high in the Control Panel
menu.
menu.
In the Control Panel menu, set Head Height to
Lowest.
(→P.611)
Lowest.
(→P.611)
Load paper of the same type as you have specied
in the printer driver.
(→P.106)
(→P.136)
in the printer driver.
(→P.106)
(→P.136)
The type of paper specied in the printer driver does
not match the type loaded in the printer.
not match the type loaded in the printer.
Make sure the same type of paper is specied in the
printer driver as you have loaded in the printer.
printer driver as you have loaded in the printer.
1.
Press the Stop button and stop printing.
2.
Change the type of paper in the printer driver and
try printing again.
The contrast becomes uneven during printing
Cause
Corrective Action
The paper feed amount is out of adjustment.
Adjust the feed amount.
(→P.612)
(→P.612)
Load paper of the same type as you have specied
in the printer driver.
(→P.106)
(→P.136)
in the printer driver.
(→P.106)
(→P.136)
The type of paper specied in the printer driver does
not match the type loaded in the printer.
not match the type loaded in the printer.
Make sure the same type of paper is specied in the
printer driver as you have loaded in the printer.
printer driver as you have loaded in the printer.
1.
Press the Stop button and stop printing.
2.
Change the type of paper in the printer driver and
try printing again.
676 Troubleshooting