Edimax Technology PS-3101 Manuel D’Utilisation

correspond to the IP address you want to assign to the 

PrintSir. 

For example, a PrintSir with the following 

configuration: 

Node ID: 0000B4010101 (this implies Ethernet 

address is 0000B4010101), 

IP address: 203.66.191.12 

The entry for this PrintSir in the /etc/bootptab file 

should be:  

The procedure below enables the RARP daemon 

running on your system to respond to a RARP request 

from the PrintSir and to assign the IP address to the 

PrintSir. 

1.  Log in the host of RARP server as the superuser 

(root). 

2.  Assign a name corresponding to the PrintSir’s IP 

address.  You can add this address to the 

/etc/hosts file, by adding a line such as: