Edimax Technology PS-3101 Manuel D’Utilisation

3.  Add the Ethernet address and the host name for 

the PrintSir to the /etc/ethers file, by adding a 

line such as: 

Where the Ethernet address of the PrintSir is the 

Node ID located on the PrintSir. 

4.  If your system uses Network Information 

Services (NIS), you will need to make changes to 

the NIS host and ethers databases. 

5.  Check if the RARP daemon is running using the 

ps and grep commands. If the RARP daemon is 

not running on your host, type “rarpd -a” to run 

the RARP server. 

To verify that your PrintSir is responding to the newly 

assigned IP address using a PING command: 

 

The procedure you use to configure your Unix host(s) 

to allow printing to your network remote print server varies 

between different varieties of Unix.  The procedure below 

can be used for Unix variants that are related to BSD Unix, 

such as SunOS or Linux.  For other versions of Unix, 

consult your system documentation, keeping in mind that: