Edimax Technology PS-3101 Manuel D’Utilisation

Lines should be indented with tabs. More than one printer 

name can be used, with variants separated by vertical bars 

(name1|name2). 

The rm= entry should correspond to the IP address you have 

assigned to the PrintSir. You can also use a host name if 

you have assigned one in the /etc/hosts file. 

The sd= entry should correspond to the spool directory you 

created in the previous step.  

The rp= entry should correspond to the port name of the 

remote printer. The values should be one of lpt1, lpt2 or 

lpt3 depends on the printer port. 

The PrintSir should now be available for printing from your 

Unix host. 

To print to the PrintSir, you can use the lpr command: 

or, you can use the lp command on SCO Open Server: