Epson 1000 Manuel D’Utilisation

If the self test prints correctly, you are ready to connect your

printer to the computer. You need a shielded, twisted-pair

parallel cable to connect your computer to the printer’s built-in

parallel interface.

Follow these steps:

1. Make sure both the printer and computer are turned off.

2. Plug the cable connector securely into the printer’s interface

connector.

3. Squeeze the wire clips together until they lock in place on

both sides. If your cable has a ground wire, connect it to the

ground connector above the interface connector.

4. Plug the other end of the cable into the computer’s parallel

interface. If there is a ground wire at the computer end of

the cable, connect it to the ground connector at the back of

the computer.