Savin 9927DP Manuel D’Utilisation
Copying
40
2
To stop scanning
When you are using the Sort, Stack, or
Staple function, the originals are
scanned into memory.
Staple function, the originals are
scanned into memory.
A
Press the {
Clear/Stop
} key.
To resume scanning
A Press the {
Start
} key.
Scanning is resumed.
Note
❒ Scanned images in memory
are not cleared.
To clear all scanned images
A Press the {
Clear Modes
} key.
Scanning is stopped and the set-
tings are cleared.
tings are cleared.
When memory reaches 0%
Scanning will be stopped if the size of
scanned image data exceeds memory
capacity.
scanned image data exceeds memory
capacity.
Note
❒ The number of originals that can
be stored in memory varies de-
pending on the memory setting
and original type.
pending on the memory setting
and original type.
❒ The maximum number of originals
that can be stored is about 100 pag-
es.
es.
Reference
For details, see “08. Print Quality”
and “09. Image Adjustment” in
and “09. Image Adjustment” in
To copy scanned so far originals
A
Press the
[Print]
key.
The scanned pages are delivered to
the tray then the image data in
memory is cleared.
the tray then the image data in
memory is cleared.
B
Remove the copies and continue
copying by following the instruc-
tions on the display.
copying by following the instruc-
tions on the display.
To cancel the copy operation
A
Press the
[Clear]
key.
Scanning is stopped and the set-
tings are cleared.
tings are cleared.