Olivetti P26 Manuel D’Utilisation
Network Configuration> 11
U
SING
A
DMIN
M
ANAGER
AdminManager is a powerful Microsoft Windows-based utility to
configure all network interface functions easily and intuitively via
a graphical user interface.
configure all network interface functions easily and intuitively via
a graphical user interface.
Configuration requires a PC with Windows 2000 Advanced
Server/Professional or Windows XP running TCP/IP or IPX/SPX
(NetWare).
Server/Professional or Windows XP running TCP/IP or IPX/SPX
(NetWare).
This utility can only be used on a PC that can be connected to the
network with TCP/IP or IPX/SPX and must be used on a PC that
is located on the same segment as the printer.
network with TCP/IP or IPX/SPX and must be used on a PC that
is located on the same segment as the printer.
To create a NetWare queue, NetWare Client 32 or IntranetWare
Client should be installed on to your system.
Client should be installed on to your system.
I
NSTALLATION
1.
Insert the Network Software CD-ROM into the CD-ROM
drive. The Setup Utility starts automatically. If it does not
start, double-click \autorun.exe (in the root directory)
on the CD-ROM.
drive. The Setup Utility starts automatically. If it does not
start, double-click \autorun.exe (in the root directory)
on the CD-ROM.
2.
Select [Network Card Setup].
3.
Select [Network Card Standard Setup].
4.
Select the appropriate language.
5.
Follow the on-screen instructions. If you want to install
AdminManager on to your local drive, select [Install and
Execute]. Otherwise, select [Execute from CD-ROM].
AdminManager on to your local drive, select [Install and
Execute]. Otherwise, select [Execute from CD-ROM].
6.
To run AdminManager, check [Yes] for [Do you wish to
execute AdminManager?] and click [Finish]. Otherwise
check [No] and click [Finish].
execute AdminManager?] and click [Finish]. Otherwise
check [No] and click [Finish].