Olivetti P26 Manuel D’Utilisation

Network Configuration> 9

Quick Setup utility allows you to configure the network interface 
easily and simply without installing any software packages.

 You can configure the following:

Enable/disable TCP/IP, NetWare, EtherTalk, NetBEUI 
protocols.

Set IP address, Subnet Mask and Gateway for TCP/IP 
manually or by using DHCP.

Set NetWare mode and create Queue/Print Server/Printer 
objects.

Zone name and Port name for EtherTalk.

Configuration requires a PC with Windows 2000 Advanced 
Server/Professional or Windows XP running TCP/IP or IPX/SPX 
(NetWare).

This utility can only be used on a PC that can be connected to the 
network with TCP/IP or IPX/SPX.

This utility must be used on a PC that is located on the same 
segment as the printer.

To create a NetWare queue, NetWare Client 32 or IntranetWare 
Client should be installed in your system.

The following explanation uses Windows 98 as an example. 

Telnet

Configure the NIC using 
TELNET.

Third-party vendor 
developed TELNET 
client package.
A TELNET Application is 
standard in Windows/
UNIX/Linux.

SNMP

The printer and network 
card can be controlled 
using third-party 
vendor developed SNMP 
application.

Third-party vendor 
developed SNMP 
application.