Olivetti P20W Manuel D’Utilisation
Network Configuration> 30
IP A
DDRESS
S
ETUP
If you only use TCP/IP and the printer has not yet been
configured, occasionally it may not be displayed on
AdminManager. You can configure the IP address of the printer
by this function.
configured, occasionally it may not be displayed on
AdminManager. You can configure the IP address of the printer
by this function.
1.
Select [IP Address Setup] from the [Setup] menu.
2.
Set [Ethernet Address] and [IP Address] and select [OK].
>
The Ethernet Address (MAC address) is displayed during
the self-diagnostic test.
the self-diagnostic test.
3.
AdminManager asks if you want to initialise the network
interface card or not. Select [Yes].
interface card or not. Select [Yes].