Olivetti P20W Manuel D’Utilisation

Network Configuration> 31

In the [Option] menu, the following item can be selected:

Use TCP/IP 
Protocol

If this item is selected, AdminManager uses TCP/IP 
protocol to search/configure network interface cards.

Use IPX/SPX 
Protocol

If this item is selected, AdminManager uses IPX/SPX 
protocol to search/configure network interface cards.

Environment 
Setup

TCP/IP Tab

Set broadcast addresses that are 
used to search printers using the 
TCP/IP protocol. If [Use TCP/IP 
protocol] is unchecked, the 
search will not be carried out 
using TCP/IP.

NetWare Tab

Set network addresses that are 
used to search printers via 
NetWare protocol. If there any 
many NetWare file servers on 
your network, specify the 
network address to which the 
network card belongs. If [Use 
NetWare protocol] is unchecked, 
the search will not be carried out 
using NetWare, but if [Auto 

Search] is selected, AdminManager will search all 
networks that AdminManager can detect.

TimeOut Tab

[Search Every]: Set response 
waiting time from a network card 
in seconds.
[Time Out]: Set time out 
between AdminManager and the 
network interface card in 
seconds.

[Retry]: Set how many times the retry will be carried 
out between AdminManager and the network 
interface card.