Manualsbrain.com
  1. Manuels
  2. Marques
  3. Olivetti
  4. P20W
  5. Manuel D’Utilisation

Olivetti P20W Manuel D’Utilisation

Télécharger
Page de 95
Microsoft Windows> 54
2.
Select [Network and Internet Connection] and [Network 
Connection].
3.
Double-click [Local Area Connection] and click 
[Properties] in the [Location Area Connection Status] 
dialogue box.
4.
If the [Internet Protocol (TCP/IP)] is not listed, click 
[Install…] button.
5.
In the [Select Network Component Type] dialogue box, 
select [Protocol] then click the [Add] button.
6.
In the [Select Network Protocol] dialogue box, select 
[Internet Protocol (TCP/IP)] then click [OK].
7.
The Windows XP installation CD-ROM may be required. 
Follow the remaining dialogue box prompts.
Once the protocol has been installed and configured in Windows, 
the next step is to configure the TCP/IP parameters in the 
network printer.
N
ETWORK
 
PRINTER
 IP 
ADDRESS
 
CONFIGURATION
Use the Standard Set-up Utility to configure the IP Address, 
Subnet Mask and Gateway.
NOTE:
Some steps may not display depending on the network 
protocols installed.
1.
Connect the printer to the network and turn on. 
2.
Place the Network Software Utilities disk in the CD-ROM 
drive. The set-up utility starts automatically. If the set-up 
utility does not start, double-click on setup.exe in the 
Windows folder of the CD-ROM.
3.
Select [Network Card Set-up].
4.
Select [Network Card Quick Set-up].
5.
Click [Next] at Welcome screen.
6.
If you agree to the User Licence Agreement, click [Next].
7.
Select the appropriate network card, using the Ethernet 
address to identify it, and click [Next].