Olivetti P20W Manuel D’Utilisation
Microsoft Windows> 56
Now that both Windows and the printer have been configured to
use TCP/IP, the next step is to configure Windows to print to the
network printer.
use TCP/IP, the next step is to configure Windows to print to the
network printer.
W
INDOWS
2000
NOTE:
Windows 2000 requires administrator privileges.
Windows 2000 requires administrator privileges.
With Windows 2000, there are four options for printing using
TCP/IP.
TCP/IP.
>
Manufacturers’ LPR
>
Microsoft LPR
>
Port 9100
>
IPP
Manufacturers’ LPR
Please follow the procedure described on
Microsoft LPR
NOTE:
In order to use Microsoft LPR, it must first be installed on your
system.
In order to use Microsoft LPR, it must first be installed on your
system.
To install this port, proceed as follows:
1.
Select [Start], [Settings], [Control Panel and Printers].
2.
Open the [Printers] folder.
3.
Double-click [Add Printer] and then select [Next].
4.
Select [Local Printer], clear the [Automatically detect my
printer] check box, and then select [Next].
printer] check box, and then select [Next].
5.
Select [Create a new port] and then [LPR Port].
6.
Select [Next] and then provide the following information:
(a)
In [Name or address of server providing LPD] enter
the host name or Internet Protocol (IP) address of
the host for the printer you are adding.
the host name or Internet Protocol (IP) address of
the host for the printer you are adding.
(b)
In [Name of printer or print queue on that server]
type "lp".
type "lp".