Sony LPR-1000MD Manuel D’Utilisation

Ma
in

te

na
nc
e

Cleaning the Head

41

Push the MENU button.
The READY indicator goes off and the message 
“Ink level” appears.

Push and hold the MENU button or BB button until 
the message “Cleaning.” appears on the printer 
window display.

Push the SET button.
The message “Clean?/Yes_” appears.

Push the SET button.
The printer starts cleaning the head.
When the printer is cleaning the head, the following 
message appears.

When the printer finishes cleaning the head, the 
message “Cleaning.” appears again.

Push the READY button.
The READY indicator lights in green, and the 
message “READY” appears on the printer window 
display.

When the head cleaning is completed
Check the result of the head cleaning by printing a test 
page.
For detailed information on test printing, see “Printing a 
Test Page” on page 42.
If stains or smudges remain on the test sheet, repeat the 
head cleaning until the stain disappears.
If the printer cannot print a test page, the ink may have 
run out. Replace the ink cartridge.
For detailed information on replacing the ink cartridge, 
see “Replacing the Ink Cartridges” on page 43.

Printer window display