Sony LPR-1000MD Manuel D’Utilisation
Ma
in
in
te
na
nc
e
nc
e
Replacing the Ink Cartridges
43
1
Push the MENU button.
The READY indicator goes off and the message
“Ink Level” appears.
The READY indicator goes off and the message
“Ink Level” appears.
2
Push and hold the MENU button or BB button until
the message “Print test page.” appears on the printer
window display.
the message “Print test page.” appears on the printer
window display.
3
Push the SET button.
The message “Test print?/Yes_” appears.
The message “Test print?/Yes_” appears.
4
Push the SET button.
The printer starts printing a test page.
While the printer is printing the test page, the
following message appears.
The printer starts printing a test page.
While the printer is printing the test page, the
following message appears.
When the printer finishes printing the test page, the
message “Print test page./Test printing.” appears
again.
message “Print test page./Test printing.” appears
again.
5
Push the READY button.
The READY indicator lights in green, and the
message “READY” appears on the printer window
display.
The READY indicator lights in green, and the
message “READY” appears on the printer window
display.
6
Check whether there are any uneven spots or any
blank spots.
blank spots.
Replacing the Ink
Cartridges
Cartridges
When the ink runs out, proceed as follows to replace the
ink cartridges.
ink cartridges.
Recommended Ink Cartridges (not supplied)
Notes on using the ink cartridge
• Be sure to remove the protective cap before using a
• Be sure to remove the protective cap before using a
new ink cartridge. If you don’t, you cannot load the
ink cartridge correctly in the printer.
ink cartridge correctly in the printer.
• Load the ink cartridge in the printer promptly after you
remove the protective cap. If dust accumulates in the
ink cartridge, this may choke the print head and cause
a malfunction of the printer.
ink cartridge, this may choke the print head and cause
a malfunction of the printer.
• Do not close the air hole located on the top of the ink
cartridge. If the air hole is covered, the ink cartridge
cannot spray the ink and this may cause a malfunction.
cannot spray the ink and this may cause a malfunction.
• It is recommended that you use the ink cartridge by the
recommended date noted on the carton of the ink
cartridge. To maintain the best print quality, use up the
ink cartridge within six months of opening it.
cartridge. To maintain the best print quality, use up the
ink cartridge within six months of opening it.
• If you refill the ink cartridge or modify it, we will not
guarantee its operation.
• Be sure not to remove or load the ink cartridge except
when replacing it.
• Be careful not to injure your fingers with pins when
changing the ink cartridge.
• Replace the ink cartridge when the printer is turned on
(the ON/STANDBY indicator is lit in green).
Color
Product name
Black
EPI-L100BL Sony Ink Cartridge
Gray
EPI-L100GL Sony Ink Cartridge
Air hole